1JZ/2JZ Coil Pack Connector Set
1JZ Coil Pack Connector Set, 6 pigtail leads with connector and pins pre-assembled in connector bodies.

Your Price:   $69.00

1JZ/2JZ Ignitor Connector 12 Pin
1JZ/2JZ Ignitor Connector 12 Pin. This connector is used on the ignitor for 1JZ-GTE and 2JZ-GTE engines. Brand New Factory Toyota part. Uses 090-II style terminals and large wire seals, available…

Your Price:   $8.59

1JZ/2JZ Ignitor Connector 4 Pin
1JZ/2JZ Ignitor Connector 4 Pin. This connector is used on the ignitor for 1JZ-GTE and 2JZ-GTE engines. Brand New Factory Toyota part. Uses 090-II style terminals and large wire seals, available…

Your Price:   $6.99

1JZ/2JZ Knock Sensor Connector
1JZ/2JZ Knock Sensor Connector. Uses an 090-II pin with large seal, sold separately. It's also used on the 3VZE V6 in Toyota trucks.

Your Price:   $5.25

7M-GTE Coil Pack Connector Harness
7M-GTE Coil Pack Connector Harness. This is the harness that goes from the 3 ignition coils to the engine harness on a 7M-GTE engine. Brand new factory Toyota part.

Your Price:   $36.00

CPS Female Connector 4 Pin
CPS Female Connector 4 Pin. This connector fit the CPS on the 7M-GTE, and the coilpack connector on the 7M-GTE. Uses 090-II pins with large wire seals, sold separately.

Your Price:   $5.99

Crank/Cam Sensor Connector 2 Pin
Crank/Cam Sensor Connector 2 Pin. This connector fits the crank and cam position sensors on 1JZ, 2JZ, and many other Toyota engines. Uses 090-II style terminals and large wire seals, sold separately.

Your Price:   $6.99

Driftmotion T shirt, Black
If you are running Driftmotion.com parts, eletronics, or turbos, than this is the item for you! High Quality Black Shirts with Driftmotion logo on the front and ghost image of a JZ motor on back. We…

Your Price:   $14.00

ECU Connector Soarer/Chaser 16 Pin
ECU Connector Soarer/Chaser 16 Pin. This connector fits the 16 pin spot on the ECU that normally comes from the body harness. These are sometimes not included when you purchase 1JZ engine sets, and…

Your Price:   $9.99

ECU Connector Soarer/Chaser 28 Pin
ECU Connector Soarer/Chaser 28 Pin. This connector fits the 28 pin spot on the ECU that normally comes from the body harness. These are sometimes not included when you purchase 1JZ engine sets, and…

Your Price:   $9.99

EV1 Injector Connector With Pigtails
Special Sale Price on this item right now! EV1 Injector Connector With 6" Pigtail Wires. Fits many aftermarket injectors and even some stock injectors. Price is for one connector with two…

Your Price:   $4.25

Idle Speed Control Connector
Idle Speed Control Connector. This is the 6 pin connector for the idle speed control stepper motor. Fits 1JZ, 2JZ, 7M, 1UZ, and others. Uses 090-II pins and large wire seals, sold separately.

Your Price:   $6.99

Ignition Coil Connector 2 Pin
Ignition Coil Connector 2 Pin. This is the new style connector for the 1JZ/2JZ ignition coils. Uses 090-II style pins and large seals, sold separately.

Your Price:   $5.79

JZ Temp Sender Connector 1 Pin
JZ Temp Sender Connector, 1 Pin. This connector fits temperature sender for the coolant gauge on many JZ engines. Uses 090-II pins with large wire seals, sold separately.

Your Price:   $5.79

MAP Sensor Connector 3 Pin
MAP Sensor Connector 3 Pin. This connectors fits the 3 pin MAP sensor on 1JZ-GTE, 2JZ-GTE and many other Toyota engines. It also fits some 3 pin TPS sensors. Uses 090 II style terminals with large…

Your Price:   $6.05

Nippon Denso Bottom Slot Injector Connector
Nippon Denso Bottom Slot Injector Connector. Sometimes called a Denso F2 connector. This injector connector is used on many Toyota fuel injectors including 7M and some 2JZ engines. Our injector…

Your Price:   $6.50

Nippon Denso Top Slot Injector Connector
Nippon Denso Top Slot Injector Connector. Sometimes called a Denso F1 connector. This injector connector is used on many Toyota fuel injectors including the 1JZ and 2JZ side feed injectors. Our…

Your Price:   $6.50

Repair Wire, 040-II
Repair Wire, 040-II. This pins fit the 1JZ Supra/Chaser connectors with 2 rows of pins, and also the 1JZ Soarer/Chaser connectors with 4 rows of pins. Sold 1ea.

Your Price:   $1.55

Repair Wire, 070 Terminal
Repair Wire, 070 Terminal. These repair wires fit the TPS and the ECU Coolant Temp Sensor connectors on the 1JZ and 2JZ engine, and also many other engine harness connectors from the 90's and later.…

Your Price:   $1.55

Repair Wire, 090 Terminal
Repair Wire, 090 Terminal. These repair wires fit many of the connectors on the 7M, and also many other engine harness connectors from the late 80's and early 90's. Pre-crimped with 18awg 6" high…

Your Price:   $1.55

Repair Wire, 090-II Terminal
Repair Wire, 090-II Terminal. These repair wires fit many of the connectors on the 1JZ and 2JZ engine, and also many other engine harness connectors from the 90's and later. Pre-crimped with 18awg 6"…

Your Price:   $1.55

Temp Sensor Connector 2 Pin
Temp Sensor Connector 2 Pin. This connector fits the temp sensors on many Toyota engines. Uses 070 style terminals and small wire seals, sold separately.

Your Price:   $6.99

TPS Connector 4 Pin
TPS Connector 4 Pin. This connectors fits the throttle position sensor on 1JZ-GTE, 2JZ-GTE and many other Toyota engines of the same years. Uses 070 style terminals and small seals, sold separately.

Your Price:   $12.59

VVTi Igniter Connector 10 Pin
VVTi Igniter Connector 10 Pin. This is the connector that fits the 3 channel igniter #DH61. Uses 090-II pins with large seal, sold separately.

Your Price:   $10.99

Wire Seal, Large
Wire Seal, Large. These seals fit some of the 090 and 090-II connector housings. The typical ID of the bore for these seals is about 5mm. Fits most 20-16ga wires. Sold 1ea.

Your Price:   $0.50

Wire Seal, Small
Wire Seal, Small. These seals fit some of the 070, 090 and 090-II connector housings. The typical ID of the bore for these seals is about 4mm. Fits most 22-18ga wires. Sold 1ea.

Your Price:   $0.50